1. Press the M button and the menu bar will pop up. 2. Press the < LEFT button or > RIGHT button until is highlighted, and the del/ add/ view/ scan menu will pop up. 3. Press the + UP button or - DOWN button to select add, and press the O button to confirm. 4. Camera will pop up, press the + UP button or - DOWN button to select the desired Camera, and press the O button to start searching for a camera unit. Note: If a camera is currently paired with the Parent Unit, its camera location (with a * against it) cannot be selected for a new registration. 5. Press and hold the PAIR button on the underside of the Baby Unit until the Parent Unit finds the camera, beeps and PAIR OK appears on the screen. The video from the camera will then appear. Note: A camera can only be registered to one Parent Unit at any one time.
How can I reset the camera?
If your Camera is moved from one router (e.g. home) to another (e.g. office) or you have Camera setup issues, then the Camera must be reset. Please reset the Camera with the following procedures: 1. Slide the ON/OFF switch to OFF. 2. Press and hold the PAIR button, then slide the ON/OFF switch to ON. 3. Release the PAIR button when you hear a confirmation beep and wait for the Camera Unit to complete an internal reset procedure. The LED indicator will turn red and flash slowly when the Camera Unit is reset successfully. 4. You can add your Camera again by following the steps in section 5.3.3 for Android™ devices or in section 5.4.3 for iOS® devices.
How to create a new Hubble for Motorola Monitors account?
• Ensure that your Android™ device is connected to your Wi-Fi® Router. • Run the ""Hubble for Motorola Monitors"" App on your Android™ device, tap SIGNUP to create new Hubble account • Enter user’s information, read through the Terms and Conditions, by signing up you agree to our Terms and Conditions. Note: If you already have an account, please tap LOGIN to go to the next step.